Loading... Please wait...


  • Image 1

Hover over main image to zoom

CANON EOS C100,C300,C500 STANDARD BASEPLATE

$360.00

Part #:
CANON-C-BP-STD
Shipping:
Calculated at checkout
Quantity:


Product Description

This baseplate is designed specifically for the Canon EOS C100/300/500. The camera is mounted to the baseplate via one 1/4-20 and one 3/8-16 captive screw. These camera mounting screws both have the same hex head size so just one 5/32 hex key is required to mount your camera. Additional locating pins front and rear ensure that your camera stays perfectly centered and will not twist. On each side of the baseplate there are locations that are pre-drilled and tapped to allow the use of either our Arri compatible rosettes or our 15 mm Counter-bored Accessory Mount Block for adding extra handles, creating a cage or adding additional accessories. This baseplate can be customized to fit any users needs. Lens center to iris rod center distance is 85 mm allowing the use of all matte boxes. There are two spring loaded indexable knobs per side on this baseplate. Using two knobs per side gives superior rod clamping strength to prevent the iris rods from rotating when using a remote handle grip relocator or running a single handle off the iris rod. The bottom of the baseplate is drilled and tapped with the 17.25 mm offset holes required for use with an Arri bridge plate. The baseplate weighs 12.125 ounces or 344 grams. Length is 3.750 inches, width is 4.500 inches.

Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write Review

 
Back to Top