<![CDATA[Berkey System: New Products - Shoulder and chest pads]]> https://store.berkeysystem.com Sun, 10 May 2026 11:42:25 +0000 <![CDATA[WIDE SHOULDER PAD 3 INCH]]> https://store.berkeysystem.com/wide-shoulder-pad-3-inch/ Mon, 31 Mar 2014 17:33:14 +0000 https://store.berkeysystem.com/wide-shoulder-pad-3-inch/ WIDE SHOULDER PAD 3 INCH

This versatile shoulder pad can be configured easily for all types of rigs and users. The pad is 3 inches wide and is covered with 1/2 inch thick neoprene foam for comfort. The neoprene is non-slip so it grips to the shoulder. When combined with our blocks nearly any degree of rotation, t..

Price: $105.00

]]> WIDE SHOULDER PAD 3 INCH

This versatile shoulder pad can be configured easily for all types of rigs and users. The pad is 3 inches wide and is covered with 1/2 inch thick neoprene foam for comfort. The neoprene is non-slip so it grips to the shoulder. When combined with our blocks nearly any degree of rotation, t..

Price: $105.00

]]> This versatile shoulder pad can be configured easily for all types of rigs and users. The pad is 3 inches wide and is covered with 1/2 inch thick neoprene foam for comfort. The neoprene is non-slip so it grips to the shoulder. When combined with our blocks nearly any degree of rotation, t..]]> <![CDATA[VersaPad Shoulder Pad]]> https://store.berkeysystem.com/versapad-shoulder-pad/ Fri, 28 Mar 2014 01:24:57 +0000 https://store.berkeysystem.com/versapad-shoulder-pad/ This view shows the front of the shoulder pad. The two short rods on 60 mm spacing are machined into the shoulder pad. Rod extensions can be added to these rods if longer length is needed.

This shoulder pad integrates into our Canon and Sony F5/55 baseplates and can be mounted to nearly any of out Camera Base Plates with a rear Quadblock. Comfortable and compact. Covered with long wearing 3/8 inch thick neoprene foam. Two 15mm rods are machined into the front of the pad allowing ..

Price: $125.00

]]> This view shows the front of the shoulder pad. The two short rods on 60 mm spacing are machined into the shoulder pad. Rod extensions can be added to these rods if longer length is needed.

This shoulder pad integrates into our Canon and Sony F5/55 baseplates and can be mounted to nearly any of out Camera Base Plates with a rear Quadblock. Comfortable and compact. Covered with long wearing 3/8 inch thick neoprene foam. Two 15mm rods are machined into the front of the pad allowing ..

Price: $125.00

]]> This shoulder pad integrates into our Canon and Sony F5/55 baseplates and can be mounted to nearly any of out Camera Base Plates with a rear Quadblock. Comfortable and compact. Covered with long wearing 3/8 inch thick neoprene foam. Two 15mm rods are machined into the front of the pad allowing ..]]> <![CDATA[ADJUSTABLE SHOULDER/ CHEST PAD ASSEMBLY]]> https://store.berkeysystem.com/adjustable-shoulder-chest-pad-assembly/ Wed, 29 Jan 2014 15:50:14 +0000 https://store.berkeysystem.com/adjustable-shoulder-chest-pad-assembly/ ADJUSTABLE SHOULDER/ CHEST PAD ASSEMBLY

This versatile shoulder pad has a 15mm mounting post and can be easily used for many types of rigs. When combined with our blocks nearly any degree of rotation, tilt, and height can be achieved.

Price: $135.00

]]> ADJUSTABLE SHOULDER/ CHEST PAD ASSEMBLY

This versatile shoulder pad has a 15mm mounting post and can be easily used for many types of rigs. When combined with our blocks nearly any degree of rotation, tilt, and height can be achieved.

Price: $135.00

]]> This versatile shoulder pad has a 15mm mounting post and can be easily used for many types of rigs. When combined with our blocks nearly any degree of rotation, tilt, and height can be achieved.

]]> <![CDATA[SHOULDER PAD ASSEMBLY WITH ULTRA LIGHT RAIL BLOCK]]> https://store.berkeysystem.com/shoulder-pad-assembly-with-ultra-light-rail-block/ Wed, 29 Jan 2014 15:50:14 +0000 https://store.berkeysystem.com/shoulder-pad-assembly-with-ultra-light-rail-block/ SHOULDER PAD ASSEMBLY WITH ULTRA LIGHT RAIL BLOCK

Shoulder pad with an Ultralight 60 rail block attached. This setup is great for running longer rails off the back of the shoulder pad to add counterweights and battery packs.

Price: $140.00

]]> SHOULDER PAD ASSEMBLY WITH ULTRA LIGHT RAIL BLOCK

Shoulder pad with an Ultralight 60 rail block attached. This setup is great for running longer rails off the back of the shoulder pad to add counterweights and battery packs.

Price: $140.00

]]> Shoulder pad with an Ultralight 60 rail block attached. This setup is great for running longer rails off the back of the shoulder pad to add counterweights and battery packs.

]]> <![CDATA[SHOULDER/CHEST PAD]]> https://store.berkeysystem.com/shoulder-chest-pad/ Wed, 29 Jan 2014 15:50:14 +0000 https://store.berkeysystem.com/shoulder-chest-pad/ SHOULDER/CHEST PAD

This versatile shoulder pad can be configured easily for all types of rigs and users. When combined with our blocks nearly any degree of rotation, tilt, and height can be achieved. The plate has many 1/4-20 and 10-32 tapped holes to allow the user to add additional accessories. This setup is gr..

Price: $90.00

]]> SHOULDER/CHEST PAD

This versatile shoulder pad can be configured easily for all types of rigs and users. When combined with our blocks nearly any degree of rotation, tilt, and height can be achieved. The plate has many 1/4-20 and 10-32 tapped holes to allow the user to add additional accessories. This setup is gr..

Price: $90.00

]]> This versatile shoulder pad can be configured easily for all types of rigs and users. When combined with our blocks nearly any degree of rotation, tilt, and height can be achieved. The plate has many 1/4-20 and 10-32 tapped holes to allow the user to add additional accessories. This setup is gr..]]> <![CDATA[Import Shoulder Pad]]> https://store.berkeysystem.com/import-shoulder-pad/ Wed, 29 Jan 2014 12:40:03 +0000 https://store.berkeysystem.com/import-shoulder-pad/ Shown here with Shoulder Pad Frame. Frame not included.

Cinecity Import Shoulder Pad

Price: $20.00

]]> Shown here with Shoulder Pad Frame. Frame not included.

Cinecity Import Shoulder Pad

Price: $20.00

]]> Cinecity Import Shoulder Pad

]]> <![CDATA[LOW PROFILE ULTRA LIGHT RAIL BLOCK, C-BORED MOUNTING]]> https://store.berkeysystem.com/low-profile-ultra-light-rail-block-c-bored-mounting/ Wed, 29 Jan 2014 12:39:31 +0000 https://store.berkeysystem.com/low-profile-ultra-light-rail-block-c-bored-mounting/ LOW PROFILE ULTRA LIGHT RAIL BLOCK, C-BORED MOUNTING

Ultralight rail block with single knob. Attaches to many of our components that have a 10-32 hole pattern on 1 inch centers. This block has two counter-bored holes on one inch centers for two 10-32 socket head cap screws. Comes with two 10-32 X3/8 long fasteners.

Price: $55.00

]]> LOW PROFILE ULTRA LIGHT RAIL BLOCK, C-BORED MOUNTING

Ultralight rail block with single knob. Attaches to many of our components that have a 10-32 hole pattern on 1 inch centers. This block has two counter-bored holes on one inch centers for two 10-32 socket head cap screws. Comes with two 10-32 X3/8 long fasteners.

Price: $55.00

]]> Ultralight rail block with single knob. Attaches to many of our components that have a 10-32 hole pattern on 1 inch centers. This block has two counter-bored holes on one inch centers for two 10-32 socket head cap screws. Comes with two 10-32 X3/8 long fasteners.

]]> <![CDATA[RIGHT ANGLE FLANGE MOUNT W/ 15MM SPUD]]> https://store.berkeysystem.com/right-angle-flange-mount-w-15mm-spud/ Wed, 29 Jan 2014 12:39:21 +0000 https://store.berkeysystem.com/right-angle-flange-mount-w-15mm-spud/ RIGHT ANGLE FLANGE MOUNT W/ 15MM SPUD

The versatile Right Angle Flange Mount can be used to mount shoulder pads, accesories to a counterweight or even the F3 Accesory Mounting Plate. The 15mm spud has a 1/4-20 tapped hole in the end for additional flexibility. These have many other uses and can be mounted to anything that has our s..

Price: $54.00

]]> RIGHT ANGLE FLANGE MOUNT W/ 15MM SPUD

The versatile Right Angle Flange Mount can be used to mount shoulder pads, accesories to a counterweight or even the F3 Accesory Mounting Plate. The 15mm spud has a 1/4-20 tapped hole in the end for additional flexibility. These have many other uses and can be mounted to anything that has our s..

Price: $54.00

]]> The versatile Right Angle Flange Mount can be used to mount shoulder pads, accesories to a counterweight or even the F3 Accesory Mounting Plate. The 15mm spud has a 1/4-20 tapped hole in the end for additional flexibility. These have many other uses and can be mounted to anything that has our s..]]> <![CDATA[FLANGE MOUNT 1/2-13 W/ COUNTER BORED MOUNTING]]> https://store.berkeysystem.com/flange-mount-1-2-13-w-counter-bored-mounting/ Wed, 29 Jan 2014 12:39:21 +0000 https://store.berkeysystem.com/flange-mount-1-2-13-w-counter-bored-mounting/ FLANGE MOUNT 1/2-13 W/ COUNTER BORED MOUNTING

This versatile Flange Mount can be used to mount a variety of items such as accesories to a counterweight or even the F3 Accesory Mounting Plate. The 1/2-13 tapped hole in the center can be used to mount any of our Extension Rods or the Accessory Mounting Post 1/2-13 to 1/4-20. These have many ..

Price: $30.00

]]> FLANGE MOUNT 1/2-13 W/ COUNTER BORED MOUNTING

This versatile Flange Mount can be used to mount a variety of items such as accesories to a counterweight or even the F3 Accesory Mounting Plate. The 1/2-13 tapped hole in the center can be used to mount any of our Extension Rods or the Accessory Mounting Post 1/2-13 to 1/4-20. These have many ..

Price: $30.00

]]> This versatile Flange Mount can be used to mount a variety of items such as accesories to a counterweight or even the F3 Accesory Mounting Plate. The 1/2-13 tapped hole in the center can be used to mount any of our Extension Rods or the Accessory Mounting Post 1/2-13 to 1/4-20. These have many ..]]> <![CDATA[FLANGE MOUNT 1/2-13 W/ TAPPED MOUNTING]]> https://store.berkeysystem.com/flange-mount-1-2-13-w-tapped-mounting/ Wed, 29 Jan 2014 12:39:21 +0000 https://store.berkeysystem.com/flange-mount-1-2-13-w-tapped-mounting/ FLANGE MOUNT 1/2-13 W/ TAPPED MOUNTING

FLANGE MOUNT /2-13 W/ TAPPED MOUNTING

Price: $20.00

]]> FLANGE MOUNT 1/2-13 W/ TAPPED MOUNTING

FLANGE MOUNT /2-13 W/ TAPPED MOUNTING

Price: $20.00

]]> FLANGE MOUNT /2-13 W/ TAPPED MOUNTING

]]> $20.00]]>