Loading... Please wait...
  • My Account
  • Sign In
  •    MY CART (0)

  • Image 1
  • Shown here attached to the F5 with carbon rods and shoulder pad
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Shown here with 15mm Rods. Rods not included.
  • Shown here attached to F5 and 15mm Rods.
  • Shown here attached to F5 and 15mm Rods.

Hover over main image to zoom

Sony PMW-F5, PMW-F55 Standard Baseplate


Out of Stock

Part #:
Calculated at checkout

Product Description

This baseplate is designed specifically for the Sony PMW-F5 and PMW-F55. The camera is mounted to the baseplate via one 1/4-20 and one 3/8-16 captive screw. There are many positions available for these mounting screws to allow you to position the baseplate fore or aft on your camera to achieve perfect balance. The camera mounting screws both have the same hex head size so just one 5/32 hex key is required to mount your camera. Six rubber pads grip the the bottom of the camera firmly to ensure the camera does not twist on the baseplateplate. On each side of the baseplate there are locations that are pre-drilled and tapped to allow the use of either our Arri compatible rosettes or our 15 mm Counter-bored Accessory Mount Block for adding extra handles, creating a cage or adding additional accessories. This baseplate can be customized to fit any users needs. Lens center to iris rod center distance is 85 mm allowing the use of all matte boxes. There are two spring loaded indexable knobs per side on this baseplate. Using two knobs per side gives superior clamping strength to prevent the iris rods from rotating. The bottom of the baseplate is drilled and tapped with the 17.25 mm offset holes required for use with an Arri bridge plate. The baseplate weighs one pound or 465 grams. Length is 6.400 inches, width is 4.500 inches.


This product hasn't received any reviews yet. Be the first to review this product!

Write Review

Find Similar Products by Tag

Baseplate  PMW-F5  PMW-F55  Sony  
Back to Top